What are the Models of the Four-button Buckle?

 Our four-part button is a rust-resistant and corrosion-resistant button. It realizes the fastening and separation of buttons by setting up magnets with opposite magnetic poles on the male and female buttons respectively, making it more convenient and labor-saving for people. When buttoning and unbuttoning, there are reflective strips on the buttons to make it easier to see the outline of the buttons when the light is not very sufficient. The outer surface of the buttons is equipped with an aluminum-zinc alloy layer, making the buttons highly resistant to corrosion.

 

The snap button are a type of button, commonly known as spring buttons and sewing buttons. The four-in-one buckle is combined with an S-shaped spring.

 

It is divided into four parts ABCD at the bottom: the AB part is called a female button, the wide edge can be engraved with patterns, there is a hole in the middle, and theThere are two parallel springs; the CD piece is called a male buckle, with a dot protruding from the middle. When the dot is pressed into the hole of the female buckle.

 

It is clamped by springs to generate opening and closing force to fix the clothes.

 

The model of the snap button is determined by the size of the next three pieces, and the commonly used models are 655, 633, and 831.

 

The three BCD pieces are generally referred to as "the next three pieces". The surface of the snap button (A piece) can be changed at will, but the next three pieces generally have their general rules.

 

The lower three pieces of the 655 model can be matched with surface buckles with a diameter of less than 10mm;

 

The lower three pieces of the 633 model can be matched with a face buckle with a diameter of 11-15mm;

 

The lower three pieces of the 831 model can be matched with surface buckles with a diameter of more than 15mm.

 

Our snap are made of high-quality, thick copper material. The thick material of the product increases the pressure, impact, and tension it can withstand. Novel style, strong sense of quality, hard texture, solid and durable. High hardness, long-lasting wear resistance, knock resistance and no deformation.

 

It is made of alloy, and the bottom three pieces are made of pure copper. Alloy flower molds are usually carved with some rather abrupt three-dimensional patterns as face buttons, and then riveted with copper feet before they can be nailed onto the garment. Alloy snap buttons​ are commonly used on down jackets, jackets, coats, coats, windbreakers and other clothing. Their metallic texture and diversified plating colors are more popular among consumers.